WhiteSinter (PA12)



WhiteSinter (PA12)

Il WhiteSinter è Nylon bianco standard: è un ottimo materiale per modelli di valutazione estetica. Per il suo colore bianco candido è ampiamente utilizzato nella produzione di modelli architettonici. WhiteSinter è adatto alle applicazioni che richiedono una buona elasticità.

Mechanical Properties Test Method English Metric
Tensile Strength ASTM D638 6,237 psi 43 MPa
Tensile Modulus ASTM D638 230 ksi 1,568 MPa
Elongation at Break ASTM D638 14% 14%
Flexural Strength ASTM D790 6,962 psi 48 MPa
Flexural Modulus ASTM D790 201 ksi 1,387 MPa
IZOD Impact, notched (Method A, 23°C) ASTM D256 0.6 ft-lb/in 32 J/m
IZOD Impact, un-notched (Method A, 23°C) ASTM D256 6.3 ft-lb/in 336 J/m
Gardner Impact ASTM D5420 2.0 ft-lb 2.7 J
Thermal Properties Test Method English Metric
Heat Deflection (HDT) @ 66 psi ASTM D648 356°F 180°C
Heat Deflection (HDT) @ 264 psi ASTM D648 203°F 95°C
Coefficient Thermal Expansion 0-50 °C ASTM E831 45.9 μin/in°F 82.6 μm/m°C
Coefficient Thermal Expansion 85-145 °C ASTM E831 99.6 μin/in°F 179.2 μm/m°C
Other Test Method Value Available Colors
Shore Hardness (D) D2240 73
White
Water absorption, % - 24 hours D570 0.07 %
Dielectric Strength D149 17.3 kV/mm
Dielectric Constant @ 1 Khz D150 2.73
Dissipation Factor @ 1 Khz D150 0.044
Specific Gravity ASTM D792 1.00g/cm3

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement.
All Trademarks included in this document are property of the respective owner