ULTEM® 1010



ULTEM 1010

L’ULTEM® 1010 è una resina FDM ad alte prestazioni che offre ottima resistenza e stabilità termica. Le certificazioni per uso alimentare e la biocompatibilità la rendono ideale per gli strumenti di produzione alimentare ed i dispositivi medici su misura e personalizzati. L’ULTEM® 1010 è una resina ad alta resistenza termica, chimica ed alla trazione: è ideale per applicazioni aerospaziali e nel settore automobilistico.

Mechanical Properties1 Test Method English Metric
Tensile Strength (Type 1, 0.125”, 0.2”/min) ASTM D638 11,735 psi 81 MPa
Tensile Modulus (Type 1, 0.125”, 0.2”/min) ASTM D638 402,000 psi 2,772 MPa
Elongation at Break (Type 1, 0.125”, 0.2”/min) ASTM D638 3,3% 3,3%
Elongation at Yield (Type 1, 0.125”, 0.2”/min) ASTM D638 2,2% 2,2%
Flexural Strength (Method 1, 0.05”/min) ASTM D790 20,835 psi 144 MPa
Flexural Modulus (Method 1, 0.05”/min) ASTM D790 409,000 psi 2,820 MPa
Flexural Strain at Break (Method 1, 0.05”/min) ASTM D790 No Break No Break
IZOD Impact, notched XZ (Method A, 23°C) ASTM D256 0.8 ft-lb/in 41 J/m
IZOD Impact, un-notched XZ (Method A, 23°C) ASTM D256 6.1 ft-lb/in 327 J/m
Thermal Properties3 Test Method English Metric
Heat Deflection (HDT) @ 66 psi, 0.125” unannealed ASTM D648 421°F 216°C
Heat Deflection (HDT) @ 264 psi, 0.125” unannealed ASTM D648 415°F 213°C
Vicat Softening Temp. (Rate B/50) ASTM D1525 416°F 214°C
Coefficient of Thermal Expansion (flow) ASTM E831 26E-06 in/in/°F 47 μm/mm/°C
Coefficient of Thermal Expansion (xflow) ASTM E831 25E-06 in/in/°F 41 μm/mm/°CC
Glass Transition (Tg) DSC (SSYS) 419°F 215°C
Melt Point - - - - - - - - - Not Applicable2 Not Applicable2
Electrical Properties Test Method Orientation Value Range
Volume Resistivity ASTM D257 XZ 1.0x1014- 8.96x1015 ohm-cm
Dielectric Constantled ASTM D150-98 XZ 2.67
Dissipation Factor ASTM D150-98 XZ 0.001
Dielectric Strength (Method A) ASTM D149-09 XZ 240 V/mil
Other3 Test Method Value Available Colors
Specific Gravity ASTM D792 1.27
Tan
Flame Classification UL94 V0 (1.5 mm), 5VA (3 mm)
Rockwell Hardness ASTM D785 109
UL File Number - - - - - - - - - E345258
Food Safety Certification NSF 51 Certified
Bio-compatibility Certification ISO 10993/USP Class VI Certified

1 Build orientation is on side long edge
2 Due to amorphous nature, material does not display a melting point
3 Literature value unless otherwise noted
4 All Electrical Property values were generated from the average of test plaques built with default part density (solid). Test plaque were 4.0 x 4.0 x 0.1 inches (102 x 102 x 2.5 mm) and were built both in the flat and vertical orientation. The range of values is mostly the result of the difference in properties of test plaques built in the flat vs. vertical orientation.

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement.
All information contained in this document were supplied by Stratasys Inc. Copyright© 2013
All Trademarks included in this document are property of the respective owner