Scalmalloy®



Scalmalloy®

La polvere Scalmalloy® prodotta e distribuita da APWorks del gruppo Airbus coniuga l'estrema leggerezza dell'alluminio sinterizzato con una resistenza molto vicina a quella del titanio per garantire le massime prestazioni.

La caratteristiche di questo materiale unite alla libertà di progettazione tipiche dell'additive manufacturing possono fornire un livello di funzionalità impossibile da raggiungere sino ad ora.


General Properties Values
Density (g/cm3) 2.70
Typical tolerance (μm) ± 100
Smallest wall thickness (mm) 1.0
Surface roughness, as built (μm) * Ra 10 / Rz 80 *
Mechanical Properties Values
Young’s Modulus (GPa) 65
Yield Strength (MPa) 450
Ultimate Tensile Strength (MPa) 490
Elongation at Break (%) 8
Vickers Hardness (HV0,3) 177

Values stated in the datasheet refer to the minimum properties that are reached using Additive Layer Manufacturing in the least strong direction of the material.
The values of the mechanical properties are generated from tests according to DIN EN 2002-001 standards from specimens that have been heat treated and machined.
* The surface roughness values depend on the measurement method used and the orientation of the surface. The values quoted here give an indication of what can be achieved for certain surfaces.
Scalmalloy® is a protected trade mark, and unauthorised or unlawful copying of the material concept is strictly prohibited.