PC-ISO



PC-ISO

Il PC-ISO (polycarbonate-ISO) è un materiale termoplastico industriale che, allo stato grezzo, ottempera allo standard ISO 10993 e la Classe USP VI 1. Le miscele PC-ISO sono comunemente usate per il confezionamento di alimenti e medicinali e, grazie all’elevata resistenza e alla biocompatibilità, nella produzione di strumenti per l’industria medicale.

Mechanical Properties1 Test Method English Metric
Tensile Strength (Type 1, 0.125”, 0.2”/min) ASTM D638 8,265 psi 57 MPa
Tensile Modulus (Type 1, 0.125”, 0.2”/min) ASTM D638 289,768 psi 998 MPa
Tensile Elongation (Type 1, 0.125”, 0.2”/min) ASTM D638 4.3% 4.3%
Flexural Strength (Method 1, 0.05”/min) ASTM D790 13,089 psi 90 MPa
Flexural Modulus (Method 1, 0.05”/min) ASTM D790 310,439 psi 2,140 MPa
IZOD Impact, notched (Method A, 23°C) ASTM D256 1.6 ft-lb/in 86 J/m
IZOD Impact, un-notched (Method A, 23°C) ASTM D256 1 ft-lb/in 53 J/m
Thermal Properties3 Test Method English Metric
Heat Deflection (HDT) @ 66 psi ASTM D648 271°F 133°C
Heat Deflection (HDT) @ 264 psi ASTM D648 260°F 127°C
Vicat Softening ISO 306 282°F 139°C
Glass Transition (Tg) DMA (SSYS) 322°F 161°C
Melt Point - - - - - - - - - Not Applicable2 Not Applicable2
Other3 Test Method Value Available Colors
Specific Gravity ASTM D792 1.2
White
Traslucent Natural
Flame Classification UL94 HB
Dielectric Constant @ 60 Hz IEC 60250 3.17
Dielectric Constant @ 1 Mhz IEC 60250 2.96

1 Build orientation is on side long edge
2 Due to amorphous nature, material does not display a melting point
3 Literature value unless otherwise noted

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement.
All information contained in this document were supplied by Stratasys Inc. Copyright© 2013
All Trademarks included in this document are property of the respective owner