PC-ABS



PC-ABS

Il PC-ABS (policarbonato-ABS) è uno dei termoplastici industriali di maggior utilizzo. Il PC-ABS mette a disposizione le qualità di entrambi i materiali: la robustezza e la resistenza al calore del PC unita alla flessibilità dell’ABS. Le miscele PC-ABS sono comunemente utilizzate nell’industria automobilistica e nelle applicazioni di elettronica e telecomunicazioni.

Mechanical Properties1 Test Method English Metric
Tensile Strength (Type 1, 0.125”, 0.2”/min) ASTM D638 5,900 psi 41 MPa
Tensile Modulus (Type 1, 0.125”, 0.2”/min) ASTM D638 278,000 psi 1,917 MPa
Tensile Elongation (Type 1, 0.125”, 0.2”/min) ASTM D638 6% 6%
Flexural Strength (Method 1, 0.05”/min) ASTM D790 9,800 psi 68 MPa
Flexural Modulus (Method 1, 0.05”/min) ASTM D790 280,000 psi 1,931 MPa
IZOD Impact, notched (Method A, 23°C) ASTM D256 3.7 ft-lb/in 196 J/m
IZOD Impact, un-notched (Method A, 23°C) ASTM D256 9 ft-lb/in 481 J/m
Thermal Properties3 Test Method English Metric
Heat Deflection (HDT) @ 66 psi ASTM D648 230°F 110°C
Heat Deflection (HDT) @ 264 psi ASTM D648 205°F 96°C
Vicat Softening ASTM D1525 234°F 112°C
Coefficient of Thermal Expansion - - - - - - - - - 4.10 E-05 in/in/°F - - - - - - - - -
Glass Transition Temp. (Tg) DMA (SSYS) 257°F 125°C
Melt Point - - - - - - - - - Not Applicable2 Not Applicable2
Other3 Test Method Value Available Colors
Specific Gravity ASTM D792 1.20
Black
Density ASTM D792 0.0397 lb/in3
Flame Classification UL94 HB (0.0335", 0.85mm)
Rockwell Hardness ASTM D785 R110
Dielectric Strength IEC 60112 35.0 kV/mm
Dielectric Constant @ 100 Hz IEC 60250 3.1
Dielectric Constant @ 100 Mhz IEC 60250 3.0

1 Build orientation is on side long edge
2 Due to amorphous nature, material does not display a melting point
3 Literature value unless otherwise noted

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement.
All information contained in this document were supplied by Stratasys Inc. Copyright© 2013
All Trademarks included in this document are property of the respective owner