NYLON 12



NYLON 12

Il Nylon 12 è ideale per le applicazioni che prevedono chiusure a pressione ripetitive, elevata resistenza chimica ed attrito tra gli inserti. L’uso principale del Nylon 12 è nell’industria aerospaziale, in quella automobilistica e nella produzione di beni di consumo come coperture, pannelli e componenti resistenti alle vibrazioni.

Mechanical Properties1 - Conditioned* Test Method English Metric
Tensile Strength (Type 1, 0.125”, 0.2”/min) ASTM D638 7,000 psi 48.26 MPa
Tensile Modulus (Type 1, 0.125”, 0.2”/min) ASTM D638 190 kpsi 1,310.03 MPa
Elongation at Break (Type 1, 0.125”, 0.2”/min) ASTM D638 30% 30%
Elongation at Yield (Type 1, 0.125”, 0.2”/min) ASTM D638 6.5% 6.5%
Flexural Strength (Method 1, 0.05”/min) ASTM D790 10,000 psi 68.95 MPa
Flexural Modulus (Method 1, 0.05”/min) ASTM D790 190 kpsi 1,310 MPa
Flexural Strain at Break ASTM D790 No Break No Break
IZOD Impact, notched (Method A, 23°C) ASTM D256 3.74 ft-lb/in 200 J/m
IZOD Impact, un-notched (Method A, 23°C) ASTM D256 >37.4 ft-lb/in >2,000 J/m
Mechanical Properties1 - Unconditioned** Test Method English Metric
Tensile Strength (Type 1, 0.125”, 0.2”/min) ASTM D638 7,700 psi 53 MPa
Tensile Modulus (Type 1, 0.125”, 0.2”/min) ASTM D638 190 kpsi 1,310 MPa
Elongation at Break (Type 1, 0.125”, 0.2”/min) ASTM D638 9.5% 9.5%
Elongation at Yield (Type 1, 0.125”, 0.2”/min) ASTM D638 6.5% 6.5%
Flexural Strength (Method 1, 0.05”/min) ASTM D790 10,200 psi 70 MPa
Flexural Modulus (Method 1, 0.05”/min) ASTM D790 190 kpsi 1,310 MPa
Flexural Strain at Break ASTM D790 No Break No Break
IZOD Impact, notched (Method A, 23°C) ASTM D256 2.8 ft-lb/in 150 J/m
IZOD Impact, un-notched (Method A, 23°C) ASTM D256 >37.4 ft-lb/in >2,000 J/m
Thermal Properties2 Test Method English Metric
Heat Deflection (HDT) @ 66 psi annealed ASTM D648 206.6°F 97°C
Heat Deflection (HDT) @ 66 psi unannealed ASTM D649 167°F 75°C
Heat Deflection (HDT) @ 264 psi annealed ASTM D650 179.6°F 82°C
Heat Deflection (HDT) @ 264 psi unannealed ASTM D651 131°F 55°C
Melt Point - - - - - - - - - 352.4°F 178°C
      Available Colors
     
Black

*Conditioned = Test specimends are conditioned according to procedure A of ASTM D618 (40 hours @ 23C and 50% relative humidity)
**Unconditioned (Dry) = As printed (No soluble support removal)
1 Build orientation is on side long edge
2 Literature value unless otherwise noted

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement.
All information contained in this document were supplied by Stratasys Inc. Copyright© 2013
All Trademarks included in this document are property of the respective owner