FlexSinter (Simil-gomma)



FlexSinter (Simil-gomma)

Il Flexsinter è un polimero sinterizzato che simula le caratteristiche della gomma. E’ disponibile un’ampia gamma di colori (nero, blu, giallo, naturale, rosso) tutti con durezza pari a 60ShA.
Il materiale ha una buona flessibilità, un buon recupero elastico ed è più durevole rispetto alla maggior parte delle altre gomme utilizzate nei processi di stampa 3D. Si presta particolarmente ad applicazioni nel settore automobilistico ed in quello dell’illuminazione.

Mechanical Properties Test Method English Metric
Tensile Strength ASTM D638 335 psi 2.3 MPa
Tensile Modulus ASTM D638 1,340 psi 9,2 MPa
Elongation at Break ASTM D638 151% 151%
Flexural Modulus @ 23°C ASTM D790 1,130 psi 7,8 MPa
Initial Tear Resistance Die C @ 23°C (73°F) ASTM D624 88 lb/lin 15,4 kN/m
Bursting Strength (Straight) @ 23°C - - - - - 11 psi 0.076 MPa
Other Test Method Value Available Colors
Shore Hardness (A) 23°C D2240 Scale A 55-80
Black
Red
Blue
Ivory
Yellow
Abrasion Resistance Taber, CS17 wheel, 1Kg (2.2lb) load ATSM D4060 - - - - -

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement.
All Trademarks included in this document are property of the respective owner