Acciaio Inox AISI316L



Acciaio Inox AlSl316L

L'acciaio Inox AISI316L è una lega a base di ferro resistente alla corrosione.
Il materiale è ideale per oggetti destinati ai consumatori come orologi, gioielli, montature per occhiali, decorazioni ed elementi funzionali nell'elettronica di consumo.
Le doti di resistenza alla corrosione lo rendono adatto agli impianti industriali e al settore Automotive e Aerospace come materiale entry level per l'uso della tecnologia SLS.
Le parti in acciaio inox AISI316L possono essere lavorate tramite impianti CNC, sottoposte a micropallinatura e lucidati

Technical Data Test Method  
Typical achievable part accuracy, small parts - - - - - - - approx. ±20-50 μm
Typical achievable part accuracy, large parts - - - - - - - approx. ± 0.2 %
Age hardening shrinkage [1] - - - - - - - approx. 0.08 %
Min. wall thickness [1] - - - - - - - approx. 0.3 - 0.4 mm
Surface roughness[2] as manufactured - - - - - - - Ra 13 ±5 μm;
Rz 80 ±20 μm;
Surface roughness[2] after shot-peening - - - - - - - Ra 5 ±2 μm;
Rz 30 ±10 μm
Surface roughness [2] after polishing - - - - - - - Rz up to < 1 μm
Physical and Chemical properties of parts Test Method  
Material composition - - - - - - - Fe balance
Cr Min. 17.00 Max. 19.00
Ni Min. 13.00 Max. 15.00
Mo Min. 2.25 Max. 3.00
C Max. 0.030
Mn Max. 2.00
Cu Max. 0.50
P Max. 0.025
S Max. 0.010
Si Max. 0.75
N Max. 0.10
Relative density with standard parameters - - - - - - - approx. 100 %
Density with standard parameters - - - - - - - min. 7.9 g/cm3
Mechanical properties of parts at room temperature Test Method As Built
Ultimate tensile strength [3] in horizontal direction (XY) ISO 6892/ASTM E8M 640 ± 50 MPa
Ultimate tensile strength [3] in vertical direction (Z) ISO 6892/ASTM E8M 540 ± 55 MPa
Yield strength, Rp0.2% [3] in horizontal direction (XY) ISO 6892/ASTM E8M 530 ± 60 MPa
Yield strength, Rp0.2% [3] in vertical direction (Z) ISO 6892/ASTM E8M 470 ± 90 MPa
Young’s modulus [3] in horizontal direction (XY) ISO 6892/ASTM E8M typ. 185 GPa
Young’s modulus [3] in vertical direction (Z) ISO 6892/ASTM E8M typ. 180 GPa
Elongation at break [3] in horizontal direction (XY) ISO 6892/ASTM E8M 40 ± 15%
Elongation at break [3] in vertical direction (Z) ISO 6892/ASTM E8M 50 ± 20%
Hardness [4] EN ISO 6508-1 typ. 85 HRB
Other Available Colors
 
Light Gray

[1] Mechanical stability is dependent on geometry (wall height etc.) and application.
[2] Due to the layerwise building, the surface structure depends strongly on the orientation of the surface, for example sloping and curved surfaces exhibit a stair-step effect. The values also depend on the measurement method used. The values quoted here given an indication of what can be expected for vertical surfaces.
[3] Machining and testing of the test bars according to ISO 6892 / ASTM E8M, proportional test pieces, diameter of the neck area 5 mm (0.2 inch), gauge length 4D = 20.0mm (0.79 inch), stress rate 10MPa/s, strain speed in plastic region 0.375 1/min.
[4] Rockwell hardness (HRB) measurement according to EN ISO 6508-1 on polished surface.
The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement.
All Trademarks included in this document are property of the respective owner