Acciaio Inox 15-5PH



Acciaio Inossidatile 15-5 PH

L’ acciaio inossidabile 15-5 PH è un materiale che offre una straordinaria combinazione di alta resistenza, buona resistenza alla corrosione e buone proprietà meccaniche a temperature fino a 316°C (600 °F)

Technical Data    
Typical part accuracy (Quote<150mm) - - - - - - - ± 0.2 – 0.3 mm
Typical part accuracy (Quote>=150mm) - - - - - - - ± 0.05 every 25mm
Surface roughness as built - - - - - - - Ra 6 - 7 μm
Surface Roughness (after machining) - - - - - - - Ra < 1.6µm
Physical and Chemical properties    
Chemical composition   Fe Balance
Cr 14,5 - 15 %
Ni 4,3 – 4,5 %
Cu 3,8 – 4,1 %
Mn < 0,1 %
Si < 0,5 %
Mo < 0,02 %
Nb < 0,3 %
C 0,02 – 0,03 %
Physical properties Relative density Approx. 99,99 %
  Density 7,80 g/cm3
Heat Treatment - Solubilization - Ageing Temperature Time Atmosphere
  0° – 1025°/55° - Vacuum
  1025°/55° - 0° Rapid cooling down in water, air or oil Vacuum
  0° - 525° - Vacuum
  525° 4h Vacuum
  525° - 0° - Vacuum
Mechanical properties Test Method As Built Heat Treated
Tensile strength ISO 6892-1:2009(B)
Annex D
1200 ± 20 MPa 1250 ± 50 MPa
Yield strength (Rp 0.2 %) ISO 6892-1:2009(B)
Annex D
850 ± 20 MPa 1175 ± 50 MPa
Elongation at break ISO 6892-1:2009(B)
Annex D
15 ± 3 % 10 ± 3 %
Hardness DIN EN ISO 6506-1 - 40 HRC
Thermal properties   As Build Heat Treated
Thermal conductivity   15 ± 2 W/m°C 15 ± 2 W/m°C
Max. Operating Temp.   550°C 550°C

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement. All Trademarks included in this document are property of the respective owner.